Hit the bike shop. the team shop. Yeah they are the team shop once again. Signed up for '07 after a few issues. Anyway... that's hopefully all water under the bridge.
I walked in with a list:
Brake Pads (inserts) for my Shimano XT cantis (old school on cross bike)
cable end caps
bolt for trail-a-bike
tube for 38s (il bruce... that rim tape job ya handed me sucked ass)
valve/seal/grommet thing for the Super Pista Pump
Got em all. Freaking amazing. Great stuff. They had that shizzle in stock.
now. for the score...
they're blowing out ALL their old stock shoes for $25 a pair. Some shoes you can save $215. I grabbed two pair. A Cannondale Mt Bike shoe with a crossover casual look, in black, $25. And a set of Sidi, MT shoes... only two velcro straps, no ratchet, BUT... did i mention $25.
Sure, they ain't as super secure as say the ratchety models, and the two straps is inferior to three... but... $25.
I passed on a set of Road Shimanos. R125s Also $25. but... i decided the road shoes i have are working better than the mt shoes, i don't need to buy three pairs of shoes today.
Wicked damn good score. Also scored time with the wife and oldest. Schools out today and they were in town and we made it a family trip out to Prov Bike.
its nice to know that the team shop has the shit in stock. even with an obscure laundry list of shit...
I'll save the new chains and 12-27 cassettes for later. Although...
about gearing... i got to thinking... Why not just run a 2 speed for cross. Stick a 18 or 19 singlespeed freewheel in the back and run a 38-46 or 38-48 or something... bang bang highspeed, lowspeed... simple... durable...
just a thought... is it better than having single front and 9 in the back?
On thing i've consciously done is to remove the computer before a cross race. normally i have the thing on when i'm commuting with it (cause i don't have a watch and its what i use to gauge time and all that)... so i dunno how fast i'm going... in the race, although i don't think it matters much - ya go as hard as ya can go, trying to make what ya got last to the end of the race...
Cyclocrossworld.com has the Dugast tires in stock... kinda makes me wanna have a nice big fat account to pull cash from to buy shit like that... ah well... i think if i go with another set of tires i'll try and get some Vreds... maybe go with the 34mm size... I'm still pretty amazed at how freaking well they worked in the muck and all that... just wishing they had a bit more volume... flats suck... And i'm sure solobreak will get a kick out of the next bit: My AirB tube... flat... *crying* ah... well... kinda stupid to be riding around with $15 tubes anyway... *sigh*
I guess right now my biggest question: Will the results be posted? Will i get bonus DFL points?
Peace, Chocolate Waffles, and Cross... The most fun you can have on two wheels...
Monday, November 13, 2006
Subscribe to:
Post Comments (Atom)

9 comments:
Velox Fond of Janet. What's better than that?
Worked fine for me. Liz got a season or so out of it sans problems. I'm sure that the boys at Stedman's installed the tape. What's your problem? Not organic cotton? Can't read French?
I got some Michelin box strapping junk that came with Liz' Ksyriums. Want it? It's yours if I can find it.
there was a nice sharp edge around the valve stem...
about 15 minutes after installing the 'muter tires (the 38c fatties) i heard...
Sssssssssssssss
coming out around the valve stem...
nice little edge around the hole...
the tubes i had musta been all wussified around the valve seat...
Oopsie!
I hadda bunch of Specilaized branded tubes that hadd suck-o valve stems. No hole they'd just rip out.
Velox cotton is fine, so is Pedros. And anyone who ever went to 7th grade metal shop knows you take a half-inch drill bit and use it (by hand) to clean up the burr on the rim hole. Still though, these modern pumps grip the stem too tight (huh-huh) and I think that is what causes all these cheap assed Taiwanese tubes to fail. When tubes were made in Japan, we didn't have this problem.
I think a one speed BMX freewheel is heavier than a spider style 9 spd cassette. Using an ordinary freehub with one cog and a bunch of spacers, yeah, that might work, but you still need a derailleur to take up the chain slack, so I don't think you gain much.
Now, using a single speed cross bike as a pit bike, I am starting to like that idea. In muck like we had on Sunday, it would be nice to have something light to carry. If you had the right gear, one speed was fine on that course. And discs are legal for non-UCI. Whatever you used, if you went with the freehub/one cog with spacers option, your wheel would still be useable on the geared bike (in the event you f'd it up during warmup). So you wouldn't really need to bring a 3rd set of wheels if you had no room. I like the looks of the Bianchi Roger. A little pricey for a single speed, but it looks cool.
we had wood shop at my school...
But... damn that's a mighty fine tip... the opening on the velox stuff is just a bit off center and it was my fault for not being more festidious about mouting the tire...
although being used i figured all the bugs were out... ah well - better to have a flat like that in the bike room than out on the bike trail... or in traffic...
Modern pump my ass....
I got this nice old school silca...
ya just gotta replace the rubber grommet every once in a while...
I have spent way more on rubber grommets than I paid for my Silca pump.
My Silca is prolly older than Zoo though.
Any idee on where I can get a presta grommet for a JoeBLow Sport? Not Prov Bike. I tried.
My Silca pump's only about 12 years old. Tried a couple different versions of the brass head... original non-switch - combo that was shitty at both back to original with schraeder threads to pump up the trailer and all that jazz...
Lessee - i'd rather replace the grommet ever year or two at $2 a pop than buy a crappy pump ever 5 years...
nothin works like a silca... esp that track one with the wooden handle. Ya can one hand it up to 100 PSI no prollem...
If old silcas are so great, why do I have five of them? The wooden handle one that lives in the Geo works fine, but of course, since it's a silca, you do have to one hand it, and the stud that holds the handle on sits right in the middle where you don't want it.
The real reason I don't like them is because I've injured myself too many times when using them barefoot and my foot got pinched under the metal foot pad. OUCH! FUCKING BLOOD BLISTER!
Post a Comment